1/2 www.asb.co.kr march 2016 p lerow tm apl s 1547.5 - r pll synthesizer module parameter unit min. typical max. frequency range mhz 1547.5 output power dbm 7 . 8 supply voltage v 5 current consum p tion ma 33 2 nd harmonics dbc - 30 spurious level dbc - 65 - 60 reference frequency mhz 10 referenc e input level dbm 0 phase noise (c / n) @ 1 khz dbc/hz - 82 @ 10 khz - 99 @ 100 khz - 120 output impedance ? 50 operating temp. range ? c - 40 25 85 package type & size mm smt, 12.7 w ? 12.7 l ? 3 h 1) measurement conditions are as follows: t = 25 ? c, v cc = 5 v, freq. = 1547.5 mhz, 50 ohm system. 2) the phase noise tolerance could be within +/ - 2 dbc/hz depending upon the noise applied to pll from the dc power supplier. specifications c o u pl er c o u pl er more inform a tion website: www.asb.co.kr e - mail: sales@asb.co.kr tel: (82) 42 - 528 - 722 0 f ax : (82) 42 - 528 - 7222 asb inc. , 44 - 14, techno 10 - ro, yuseong - gu daejeon, 305 - 510, korea description the plerow tm pll synthesizer module was designed for use in wireless and wire- line systems in a wide range of frequency from 50 mhz to 6 ghz. asb s pll pro- vides e x ceptionally low spurious and phase noise performance with fast locking time and low current c onsumption. all products are avai l able in a surface - mount type package.
2/2 www.asb.co.kr march 2016 p lerow tm apl s 1547.5 - r pll synthesizer module ou t line drawing type dimension pll ic + vco + rom 12.7 x 12.7 x 3 pin out for pll pin no. application pin no. application 1 ground 7 vcc (vco) 2 ground 9 rf out 3 ground 11 vcc (pll) 4 osc in 12 lock detect all other pins are grounded / internal rom c o u pl er micro - c ont roller referenc e freq. source (t c xo) rf o ut vcc(+5v) for pll ic vcc(+5v) for vco capacitor for noise filtering capacitor for noise filtering lock detect (ld) osc in apls0000 - r asb inc. copyright ?2006 -2017 asb inc. all rights reserved. datasheet subject to change without notice. asb assumes no responsibility for any errors which may appear in this datasheet. no part of the datasheet may be copied or reproduced in any form or by any means without the prior written consent of asb.
|
